top of page

Australia

Usage

Quick sanding of rough surface
Tungsten Carbide coating – long lasting
Detail & Sculpting Performance
Sanding inside ball and narrow area
Vibration Reduction

Only fits to “Multi Cutter”

Specifications

Max. Blade diameter: 50 mm
Max. RPM: 15,000 rpm
Power: 630 - 750 watt
Disc Bore Size: 16.08mm
Weight: 0.07kg (without angle grinder)
Working width: 50 mm

Features

Special pulley (included)
2" Sanding wheel - size: 50x50x8mm

What's included Product Composition Tungsten Carbide Wheel 2" Special Pulley

Manpa 2" Sanding Wheel

SKU: MANPA-MP21-17-2

$75.00

Quantity

Please read and follow all safety instructions carefully. Please keep the manual for future reference.
When operating, always wear safety equipment such as face masks and safety goggles.
Always secure the workpiece securely when working.
Make sure that the grinder switch is off before plugging in the power cord.
Be careful not to touch the cutter blade. Serious injury may result.
Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
After operation, turn off the switch and set it down when The remaining rotation stop completely.
Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
Inspect and tighten the bolts of each part before operation.
After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
If the cutter blade or belt is worn out, replace it with a new one.

bottom of page