top of page

• 30mm width sandpaper
• Smooth sanding with high quality #40, #100
• Detail & Sculpting Performance
• Sanding Flat, Corners and radii Shape
• Two hands Grip

Angle grinder is not included
Please check your "Spindle size" and "angle grinder".



  • Max. Sanding Width: 15 mm
  • Max. Sanding Length: 300 mm
  • Max. Sanding RPM: 26,400 rpm
  • Power: 630 - 740 watt
  • Overall Length: 300 mm
  • Disc Bore Size: M10, M14, 5/8"-11 (optional)
  • Weight: 1.1 kg
  • Working Wide: 30 mm
  • Sandpaper Width: 30 mm
  • Sandpaper Abrasiveness: #40, #100



Long Length 200mm
Belt Sander has its long length(300mm) to reach the narrow and deep areas for sanding.

Small Width 30mm
Belt Sander has its small width to sand the details and sand the flat areas too.

Various Abrasiveness
Belt Sander has 2 types of sanding abrasiveness : #40, #100.


What's included

Main Component
① Belt Sander
② Wide Handle & Cover


③ SandPaper #40 10ea
④ Drive Roller 
⑤ L Wrench

Manpa Belt Sander

    • Please read and follow all safety instructions carefully. Please keep the manual for future reference.  
    • When operation, always wear safety equipment such as face masks and safety goggle.
    • Always secure the workpiece securely when working. 
    • Make sure that the grinder switch is off before plugging in the power cord.
    • Be careful not to touch the cutter blade. Serious injury may result.
    • Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
    • When using the tool, always adjust the appropriate RPM.
    • After operation, turn off the switch and set it down when The remaining rotation stop completely.
    • Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
    • Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
    • Inspect and tighten the bolts of each part before operation.
    • After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
    • If the cutter blade or belt is worn out, replace it with a new one.
bottom of page